![]() |
![]() |
![]() |
|
Get a Quote | Subscribe to MFC E-Mails |
Single Channel Bandpass Filters | |
These filters suppress strong adjacent channel interference while maintaining low insertion loss in the passband. Models are also available for PAL and SECAM formats. Available for CATV channels 2 to 36 (54-300 MHz) 3303-TVIF:This filter passes the TVIF band, 41.25-45.75 MHz. 3303FM-16 & 3303FM-20: Wideband FM filters. |
|
|
|
The model 14584 suppresses strong adjacent channel interference while maintaining low insertion loss in the passband. Available for CATV channels 37 to 125 (300-804 MHz) or UHF channels 14 to 69 (470-806 MHz) |
|
|
|
A general purpose, low insertion loss, channel bandpass filter, suppresses interference at the semi-adjacent channel and beyond. Its applications include processor clean-up before combining or filtering off air receptions. Available for CATV channels 2 to 36 (54-300 MHz) |
Larger View ![]() 3160(D) Series PDF |
|
|
These bandpass filters can be used to clean up the desired channel at the input of the processor or at the output before combining. The model 4930 (Available for CATV channels 37 to 61) has a center frequency option of 300 to 450 MHz The model 3278(4)-HYP (Available for CATV channels 62 to 116) has a center frequency option of 450 to 750 MHz. |
|
|
|
The Model 8488B Bandpass Filter is used with CATV test equipment to isolate frequencies.
|
|
|
|
The Model 10351-(Fo) is used to isolate the DMX band with loss of 1 dB typical and 2 dB maximum. |
|