Notch
Filters
|
6367 & 6556 Series
The Model 6367
is easily tunable over a wide range of frequency
blocks between 22-900 MHz and are available in single, double
and triple cavity arrays. These filters provide ultra-selectivity
even for those in close carriers, such as adjacent FM signals.
Dual adjustments allow the user to control the frequency and the
bandwidth of the notch, making this filter quite a versatile tool. |
|
Download
6367 PDF
Other
CATV Filters
SIngle Channel Deletion
(Digital)
Multi-Channel
Deletion (Digital)
SIngle Channel Deletion (Analog)
Multi-Channel Deletion (Analog)
Bandpass
Lowpass & Highpass
Channel Reprocessing Networks (CCTV)
Bandstop
Bandsplitters/Combiners
Cable Simulator
|
|
The
custom Model 6556 is cut to your specified frequency
between 900 - 1450 MHz. These filters are fine-tunable and are also
available in single, double and triple cavity arrays. Ideal for
removing interference from cellular (PCS), satellite (blockband)
or any other carrier within this band. |
|
Download
6556 PDF
|
|
3468 Series
|
|
|
Series
3468 suppress
interference or reduce spurious carriers. They are easy to tune
with two self-locking screwdriver adjustments. (There is only
one tuning adjustment for the 3468-FMS.) They are housed in a
seamless steel case sealed against moisture. The traps can be
experimentally adjusted to reduce out-of-band interference whose
frequency may not be precisely known. Each tuning screw controls
the frequency of a separate, sharp notch which may be used independently
or synchronously to give the notch and bandwidth shown. For a
nominal extra charge, units can be tuned and marked to specified
frequency. |
|
3469 Series
Series
3469 are
sound carrier traps used to reduce sound carrier levels. These
are narrow band notch filters which are tunable with a self-locking
screwdriver slot. Controlled sound reduction with minimum impact
on color is achieved by tuning into the sound carrier from a higher
frequency (clockwise slot rotation.) The 3469 can be factory preset
to customer specified frequency. |
|
|
|
5891 Series
The Model 5891
is installed at the off-air antenna to prevent
pre-amplifier overload from strong UHF. |
Larger
View
Download
PDF
|
|
Note:
If you were unable to find a filter product that meets your
requirements
please call our Technical Staff for assistance.
|